From: Dr Bob <drbob**At_Symbol_Here**FLOWSCIENCES.COM>
Subject: Re: [DCHAS-L] Laboratory Gas Storage separation of Incompatibles
Date: Tue, 2 Aug 2016 11:51:06 +0000
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: 7B39633B01F4EE42A269E983C42F5A480AF5AB31**At_Symbol_Here**SULFATE.fsidomain.local

Hi Chris!


Again-.air changes!


Very Truly Yours,


Dr. Bob Haugen

Director of Product and Technology Development

Flow Sciences Inc.

2025 Mercantile Drive

Leland, NC 28451


Phone 910 332 4878


From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**] On Behalf Of Kohler, Christopher E
Sent: Tuesday, August 02, 2016 7:00 AM
Subject: [DCHAS-L] Laboratory Gas Storage separation of Incompatibles






Sent from my Verizon, Samsung Galaxy smartphone


Whats the best way to store and separate the following gases in a laboratory within the regulations..


We have a potential gas storage room (that would need to be converted), a single cylinder vented cabinet (but could purchase more), and the usual lab wall storage.


O2,  CO, CO2, H2, He, CH4, propane, and compressed air.



IU EHS, Lab Safety Manager



Not spam
Forget previous vote

Previous post   |  Top of Page   |   Next post

The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.