From: TILAK CHANDRA <tilak.chandra**At_Symbol_Here**WISC.EDU>
Subject: Re: [DCHAS-L] Peroxide Formers Question
Date: Thu, 18 Aug 2016 14:38:17 +0000
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: BLUPR06MB11388172741CC1C20CA94E088150**At_Symbol_Here**
In-Reply-To <816016F1-44E5-40BF-936A-15B609F98595**At_Symbol_Here**>

Generally, Grignard and pyrophoric reagents such astert-BuLi should be used/consumed ASAP. These reagents are not good for long term storage purpose. If you see lot of solid sitting in the bottom of reagent bottle, definitively they are not useful for the reaction. 


Procuring less volume of these sensitive reagents is always plus.





From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**]On Behalf Of Dan Kuespert
Sent: Thursday, August 18, 2016 8:46 AM
Subject: Re: [DCHAS-L] Peroxide Formers Question


I strongly recommend the chapter on Peroxide-Forming Chemicals in the ACS Handbook of Chemical Health & Safety. I prepared a talk on peroxidizables for our chemistry department a couple years ago and found it invaluable (both the main text and the references).


I’m leery of accepting the argument that Grignard reagents and other reactive compounds contained in the peroxidizable will necessarily suppress the formation of peroxidizables without any actual evidence. If the compound in question is a free-radical scavenger, I get it, but while Grignards sometimes form via a free-radical mechanism, I’ve never heard of them being considered scavengers or stabilizers.


Another consideration is that the peroxides may form a different phase than the ether or THF, and sometimes the critical concentration for that phase behavior is quite low. This is the source of the crystals sometimes seen floating in bottles of isopropyl ether. So your other compounds may not be relevant because they can’t reach the peroxides to degrade them.


A Sigma-Aldrich SDS for methlymagnesium bromide in solution (diethyl ether) I just pulled specifically states that it accumulates peroxides.







Dr. Daniel R. Kuespert

Homewood Laboratory Safety Advocate

Krieger School of Arts & Sciences/Whiting School of Engineering

The Johns Hopkins University

103G Shaffer Hall

3400 North Charles St.

Baltimore, MD 21218

(410) 516-5525


On Aug 16, 2016, at 17:15, Humphrey, Karalyn J. <Karalyn_Humphrey**At_Symbol_Here**BAYLOR.EDU> wrote:


We’re in discussion with a research group who uses quite a number of materials flagged by our inventory system as being peroxide formers.  Their claim is that certain of their materials will be unlikely to form peroxides because there are other chemicals mixed in with things life THF and ether (for example, methylmagnesium bromide in THF).  My thought is that their logic is sound, but I wanted to push the question to a broader group to see if there is a consensus out there. 


Thank you,



Karalyn (Karen) Humphrey, Ph.D


Laboratory Safety Program Manager

& Radiation Safety Officer

Department of Environmental, Health & Safety

Baylor University


Office: Draper 244.10

Phone:  254-710-2002



"… our job in safety is to make the task happen, SAFELY; not to interfere with the work…” Neal Langerman


Previous post   |  Top of Page   |   Next post

The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.