I like that wording. Much more defined than safe. Thx
Neal et al,From the Medical Toxicology standpoint, at least for human eye/skin exposures, in general we talkn ot of "safe"pH ranges but rather of the "physiologically tolerable pH range" of 6.0-9.0 (although some prefer 5.5 to 8.5).Don't know if that applies to this question.AlanAlan H. Hall,M.D.On Mon, Oct 31, 2016 at 1:23 PM, NEAL LANGERMAN <neal**At_Symbol_Here**chemical-safety.com> wrote:Ralph
It strikes me that "safe" is not the endpoint; rather the endpoint is when
does the object cease modifying the pH of the extractant water. For
operational purposes, I would wear gloves until the pH of at least 2
consecutive extractions is <= 9.
The "what is safe" is a separate discussion that needs to address extent of
anticipated exposure. I agree with Kay that wearing gloves 100% of the time
leads to sloppy practices.
Hope this helps
The information contained in this message is privileged and confidential and
protected from disclosure. If the reader of this message is not the intended
recipient, or an employee or agent responsible for delivering this message
to the intended recipient, you are hereby notified that any dissemination,
distribution or copying of this communication is strictly prohibited. If you
have received this communication in error, please notify us immediately by
replying to the message and deleting it from your computer.
ACSafety has a new address:
NEAL LANGERMAN, Ph.D.
ADVANCED CHEMICAL SAFETY, Inc.
PO Box 152329
SAN DIEGO CA 92195
011(619) 990-4908 (phone, 24/7)
We no longer support FAX.
Please contact me before sending any packages or courier delivery. The
address for those items is:
5340 Caminito Cachorro
San Diego CA 92105
From: ACS Division of Chemical Health and Safety
[mailto:DCHAS-L**At_Symbol_Here**PRINCETON.EDU] On Behalf Of Stuart, Ralph
Sent: Monday, October 31, 2016 10:15 AM
Subject: Re: [DCHAS-L] Upper limit of pH hazards
>why would one work actively in a chemistry lab without gloves?
The 3D printer pieces will not be used in the lab setting; there is concern
that the printed pieces could have micropores that retain corrosive liquids
longer than other types of materials. The student project will be to
determine the pH of the rinse water after each rinse to see how long it
takes to reach a "safe" level for the piece to leave the lab and enter the
world of things. Hence the question of what "safe" means.
Thanks to everyone for helping me to refine the question.
Ralph Stuart, CIH, CCHO
Chemical Hygiene Officer
Keene State College
This e-mail is from DCHAS-L, the e-mail list of the ACS Division of Chemical
Health and Safety.
For more information about the list, contact the Divisional secretary at
This e-mail is from DCHAS-L, the e-mail list of the ACS Division of Chemical Health and Safety.
For more information about the list, contact the Divisional secretary at secretary**At_Symbol_Here**dchas.org
Previous post | Top of Page | Next post