From: "Stuart, Ralph" <Ralph.Stuart**At_Symbol_Here**KEENE.EDU>
Subject: Re: [DCHAS-L] Gases that may Autopolymerize
Date: Wed, 12 Apr 2017 17:13:44 +0000
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Message-ID: 2D9BB965-9FA7-44F0-BEDF-D182BCC65060**At_Symbol_Here**

> >I would highly recommend conducting a Hazard assessment (What if analysis method; ACS) for these gases. Developing a valuable SOP depends how the chemical or gas is used for a manipulation or reaction.

Good point. It is often the case that a SOP is not the right safety planning tool for chemicals with very specific hazards and/or uses...

Thanks for sharing this thought.

- Ralph

Ralph Stuart, CIH, CCHO
Environmental Safety Manager
Keene State College
603 358-2859


This e-mail is from DCHAS-L, the e-mail list of the ACS Division of Chemical Health and Safety.
For more information about the list, contact the Divisional secretary at secretary**At_Symbol_Here**

Previous post   |  Top of Page   |   Next post

The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.