Safety Emporium eyewashes
Safety Emporium eyewashes

Interactive Learning Paradigms, Incorporated

DCHAS-L Discussion List Archive


From: ILPI Support <info**At_Symbol_Here**ILPI.COM>
Subject: Re: [DCHAS-L] ? Re Eyewash Water Temp Spikes?
Date: Thu, 20 Apr 2017 17:07:57 -0400
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Message-ID: 54BFCEF5-2A03-4629-8423-A5CAFCCEBCFA**At_Symbol_Here**ilpi.com
In-Reply-To <1109037139E1524980CF9CBEB2476618010AEB70D3**At_Symbol_Here**UMF-EX10EMB2.umflint.edu>


Need to know more about the system to diagnose it.  So first off, is this an eyewash or safety station? Is it served directly by a tempering unit (thermostatic mixing valve) or does one feed several eyewashes?  What size inlet lines are supplying the water and is there any sort of recirculating loop in the install?  Do we know the temperature of the incoming water - can test that by getting temp of cold and hot water in the lab faucets, I suppose.

This may require pictures. You can't post pictures to the list, but you can upload them somewhere and then reference them by URL.  If you can't do that, send pictures off-list and I can post them for you.

Rob Toreki

 ======================================================
Safety Emporium - Lab & Safety Supplies featuring brand names
you know and trust.  Visit us at http://www.SafetyEmporium.com
esales**At_Symbol_Here**safetyemporium.com  or toll-free: (866) 326-5412
Fax: (856) 553-6154, PO Box 1003, Blackwood, NJ 08012



On Apr 20, 2017, at 4:27 PM, Wilhelm, Monique <mwilhelm**At_Symbol_Here**UMFLINT.EDU> wrote:

On the topic of eyewashes, and knowing that Ellen and others were recently working on ANSI Z358.1 2016:
 
Does anyone have any specs on temp ranges other than the ANSI 60-100*F range?  Is it acceptable to JUMP (temp change occurs within seconds) between 60 & 100 4 times over 2 minutes?  Or, does anyone read the appendix B6 statement about the temps being conducive to a 15 minute flush period along with the amount of discomfort this type of sudden change would give to indicate that this is not acceptable?  Are you required to tag a unit out of service if it goes out of this range or is it ok to just take the average temp of the water over the test period?  If unacceptable, what range would be more acceptable and over what period? 
 
When you are watching one thing and discover a new thing-.gotta love science!  We have WAY too many eyewashes in our labs and the more of something you add, the more likely you are to find a problem.
 
Monique Wilhelm
Laboratory Manager
Department of Chemistry & Biochemistry
University of Michigan - Flint
 

Previous post   |  Top of Page   |   Next post