From: Richard Rosera <richardrosera**At_Symbol_Here**GMAIL.COM>
Subject: [DCHAS-L] Making Sense of Laboratory Fire Codes
Date: Wed, 28 Jun 2017 14:22:22 -0600
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Message-ID: 56F1D8BB-7FFF-4EAC-89AA-3F2DEE2F941B**At_Symbol_Here**gmail.com


The following article may be of interest to DCHAS members.

Richard Rosera
Rosearray EHS Services LLC
908-279-4463

In Chemical Engineering Progress - July 2017
 
SAFETY
Making Sense of Laboratory Fire Codes
https://www.aiche.org/sites/default/files/cep/20170754.pdf 
)

Laboratory owners are faced with a difficult task when building a new lab or renovating an existing one; two fire-prevention codes specify different restrictions on the quantities of hazardous materials that can be used and stored in that facility.


Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.