From: Aaron's Phone <cycling1**At_Symbol_Here**VERIZON.NET>
Subject: Re: [DCHAS-L] Fume Hood Regs
Date: Wed, 23 Aug 2017 22:47:39 -0400
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Message-ID: BAC9A00B-DA62-4334-9E34-07514D4B6510**At_Symbol_Here**
In-Reply-To <1109037139E1524980CF9CBEB2476618010AFAEE3F**At_Symbol_Here**>


The best place to look is 1910.1450.

A requirement that fume hoods and other protective equipment are functioning properly and specific measures that shall be taken to ensure proper and adequate performance..........

I was the CHO at a laboratory with over 1100 lab hoods.  This standard is not very specific but is one of the few regulatory requirements that gave us some standing on how to protect our research teams.

Aaron Chen, MPH, CIH, FAIHA

Sent from Aaron's iPhone.  

On Aug 23, 2017, at 2:15 PM, Wilhelm, Monique <mwilhelm**At_Symbol_Here**UMFLINT.EDU> wrote:

Does anyone know of any regs that specifically state WHEN fume hoods are required,  specifically ducted hoods?

Thank you,

Sent from my Verizon, Samsung Galaxy smartphone

For more information about the DCHAS-L e-mail list, contact the Divisional secretary at secretary**At_Symbol_Here**
Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post

The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.