From: Bill <0000048b89bc676d-dmarc-request**At_Symbol_Here**LISTS.PRINCETON.EDU>
Subject: Re: FW: RE: [DCHAS-L] Question
Date: Tue, 3 Oct 2017 16:40:02 +0000
Reply-To: Bill <misterbill21225**At_Symbol_Here**YAHOO.COM>
Message-ID: 1078746612.564467.1507048802699**At_Symbol_Here**
In-Reply-To <008801d33c62$57575880$06060980$**At_Symbol_Here**>


Most any provider - like MilRam - can provide the sensors. The setup is easy enough even someone like me can assemble it (do have a bit of practice at it). The sensors inside are explosion proof, the cable runs through conduit to the outside light/detector, and connects by 4-20mA. Some are even IR capable. MilRam is located in CA, IH News Magazine carries their ads.
Hope this helps

Bill Parks
CIHM, CHST, LSP, CEHT, (CSSHO, CES and CIE in progress) on LinkedIn; and

**Providing sound Industrial Hygiene; Occupational Health and Safety; EM385-1-1 Project Support; Environmental Health, IAQ, Asbestos, Lead, and Mold Investigations; Environmental Science; and Laboratory Support Services and solutions**

Progress, not Perfection

We sleep soundly at night because rough men are prepared to do violence to protect us.

Winston Churchill

On Tuesday, October 3, 2017 9:24 AM, Russ Phifer <rphifer**At_Symbol_Here**WCENVIRONMENTAL.COM> wrote:

I'm putting this out to the List on behalf of an area hospital. Does anyone have any advice on this question?
Our lab has recyclers for xylene and ethyl alcohol.  I am trying to find an explosion proof external monitor to install outside the still room.  I would like to have the level set to alarm below the OSHA TWA level.  I have reached out to multiple vendors.  Some have not replied and some do not have a monitor for our needs.
Does anyone have any advice for her on equipment or vendors?
Russ Phifer
From: Groff, Alissa S [mailto:agroff**At_Symbol_Here**]
Sent: Tuesday, October 03, 2017 6:37 AM
To: rphifer**At_Symbol_Here**
Subject: Re: RE: Question
Absolutely, thank you and appreciate your help!
Alissa S. Groff, MT (ASCP)
Laboratory Safety Coordinator
Laboratory Services
WellSpan York Hospital
Phone: (717) 812-3598
Fax: (717) 851-4663
Thank you,
Alissa S. Groff, MT (ASCP)
Laboratory Safety Coordinator
Laboratory Services
WellSpan York Hospital
Phone: (717) 812-3598
Fax: (717) 851-4663

The information contained in this communication, including all attachments, is legally protected information, confidential or proprietary information, or a trade secret intended solely for the use of the intended recipient or otherwise exempt from disclosure under applicable state and federal law, including, but not limited to, privacy standards imposed pursuant to the federal Health Insurance Portability and Accountability Act of 1996 ("HIPAA"). The information may also be subject to legal privilege. If you are not the intended recipient, you are hereby notified that any use, disclosure, dissemination, distribution, forwarding, or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender by reply Fax or e-mail stating the communication was "received in error" and delete or destroy all copies of this communication, including all attachments.

Message string: KqxfH=TU
--- For more information about the DCHAS-L e-mail list, contact the Divisional secretary at secretary**At_Symbol_Here** Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post

The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.