From: Monona Rossol <0000030664c37427-dmarc-request**At_Symbol_Here**LISTS.PRINCETON.EDU>
Subject: Re: [DCHAS-L] Fume Hood Ducting
Date: Fri, 13 Oct 2017 09:50:24 -0400
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Message-ID: 15f1600120e-c0b-42ed1**At_Symbol_Here**webjas-vaa175.srv.aolmail.net
In-Reply-To <006f01d343b2$8c193be0$a44bb3a0$**At_Symbol_Here**net>


Anyone who cleans the area around a stove in any house should be well aware that oils of all kinds volatilize and/or form mist particulates and deposits on surfaces.  What do you think that nasty grease is all over your cabinet doors?  Why do you think commercial kitchen hoods are called "grease hoods" and methods of cleaning the grease out of them and their filters is part of every restaurant maintenance schedule?


Take your chemistry head with you where ever you go.

Monona Rossol, M.S., M.F.A., Industrial Hygienist
President:  Arts, Crafts & Theater Safety, Inc.
Safety Officer: Local USA829, IATSE
181 Thompson St., #23
New York, NY 10012     212-777-0062
actsnyc**At_Symbol_Here**cs.com   www.artscraftstheatersafety.org

 


-----Original Message-----
From: Laurence Doemeny <ldoemeny**At_Symbol_Here**COX.NET>
To: DCHAS-L <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Sent: Thu, Oct 12, 2017 9:39 pm
Subject: Re: [DCHAS-L] Fume Hood Ducting

Yes it is reasonable and possible for mineral oil, even at room temperature, to evaporate and condense on the duct work.  Researchers working with high vacuum lines put low temperature traps on the low pressure side of the pump to prevent oil entering the system.  While the vapor pressure of mineral oil is low it is significant that over time an oil film can develop on various surfaces.
 
This reference is not directly related to your observation but it does show that mineral oil does evaporate.  https://www.cdc.gov/niosh/nioshtic-2/00229101.html
 
From: ACS Division of Chemical Health and Safety [mailto:DCHAS-L**At_Symbol_Here**PRINCETON.EDU] On Behalf Of Elizabeth Brubaker
Sent: Thursday, October 12, 2017 1:14 PM
To: DCHAS-L**At_Symbol_Here**PRINCETON.EDU
Subject: [DCHAS-L] Fume Hood Ducting
 
Has anyone experienced accumulation of oil (perhaps mineral oil from a heated oil bath?) in fume hood duct work? Is this reasonable or even possible? Could a sufficient amount remain in the system for it to condense out in the ducts when the exhaust fans were turned off for an extended period?
 
--
Beth Brubaker
Laboratory/Safety/Waste Coordinator
Murray State University Department of Chemistry
2226 Jesse D. Jones Hall
Murray, KY  42071-3300
(270) 809-6390
--- For more information about the DCHAS-L e-mail list, contact the Divisional secretary at secretary**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas
--- For more information about the DCHAS-L e-mail list, contact the Divisional secretary at secretary**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas
--- For more information about the DCHAS-L e-mail list, contact the Divisional secretary at secretary**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.