From: TILAK CHANDRA <tilak.chandra**At_Symbol_Here**WISC.EDU>
Subject: [DCHAS-L] Labeling small vials and flasks
Date: Wed, 21 Feb 2018 19:50:31 +0000
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Message-ID: DM5PR06MB3195FFA899DEACC951AC4C5A88CE0**At_Symbol_Here**

Dear DCHAS Listers:


I am looking guidelines on “labeling” synthesized products/compounds in small quantities in vials/flasks (RBF).. This is mainly problem in synthetic groups in the chemistry dept. Generally, synthetic chemists generate hundreds of compounds during their Ph. D. program and they like to keep a small portion of the compound for the future use such as TLC and other analytical reference purpose.


What is the appropriate practice for labeling these sample vials and small flasks?


Actual chemical names/structures/Note book reference such as AB-12-B?


When a flask can be labeled during routine lab work?  As an example, I am working on a column purification, and I have multiple concentrated fractions from the column.

Any information will be highly helpful.






Tilak Chandra, Ph.D.

Chemical Safety Specialist



Ph. 608-890-0255

       608-622-9761 (Cell)


“--our job in safety is to make the task happen, SAFELY; not to interfere with the work…” Neal Langerman



Previous post   |  Top of Page   |   Next post

The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.