From: andreas.mueller**At_Symbol_Here**CHEM.UZH.CH
Subject: Fw: [DCHAS-L] Rejected posting to DCHAS-L@LISTS.PRINCETON.EDU
Date: Thu, 26 Jul 2018 14:45:17 +0200
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Message-ID: OF9DE8FB8F.D41E60F0-ONC12582D6.0045FB13-C12582D6.00460A0D**At_Symbol_Here**lotus.uzh.ch


Hi Tilak,

we are in the process of switching over to heating blocks for all our chemistry teaching labs. Also where feasible in our research labs. We buy some types of heating blocks from companies like Heidolph (heat-on) other times we get it made to our need by a metal shop (including engraving, coating /  anodisation and dying).


Andreas M=FCller
 

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.