From: Dr Bob <drbob**At_Symbol_Here**FLOWSCIENCES.COM>
Subject: [DCHAS-L] 2 cm. cut paper squares and their use
Date: Fri, 3 Aug 2018 16:53:37 +0000
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Message-ID: 7B39633B01F4EE42A269E983C42F5A481E996CA5**At_Symbol_Here**SULFATE.fsidomain.local

Hi All!


Sorry I lost the com string on this one!


I think these cut square filter paper bits were used to make demmo galvanic cells by saturating the paper in an electrolite and alternately using two different metal ssquares. You can demo a battery this way with a “stack” so constructed.


Dr. Bob Haugen

Director of Product and Technology Development

Flow Sciences, Inc.


910 332 4878


Previous post   |  Top of Page   |   Next post

The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.