From: Richard Palluzi <rpalluzi**At_Symbol_Here**VERIZON.NET>
Subject: Re: [DCHAS-L] Ethane Gas Monitor
Date: Mon, 26 Nov 2018 13:42:31 -0500
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Message-ID: 00a701d485b7$ca40c9e0$5ec25da0$**At_Symbol_Here**

MSA makes an excellent model but recognize all combustible gas monitors are going to detect any combustible gas, not just methane.


Richard Palluzi



Pilot plant and laboratory consulting, safety, design,reviews, and training

Linkedin Profile


Richard P Palluzi LLC

72 Summit Drive

Basking Ridge, NJ 07920




From: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU> On Behalf Of Penny Manisco
Sent: Monday, November 26, 2018 12:35 PM
Subject: [DCHAS-L] Ethane Gas Monitor


Hi All,


Can anyone recommend a wall-mounted monitor for ethane gas?




Penny Manisco,
Chemical Hygiene Officer
Harvey Mudd College


--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here** Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post

The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.