From: DCHAS Membership Chair <membership**At_Symbol_Here**DCHAS.ORG>
Subject: [DCHAS-L] Electric kiln repair standards
Date: Wed, 29 May 2019 15:50:01 -0400
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Message-ID: F1A83068-0B19-4CC3-A483-D70E37361AB7**At_Symbol_Here**dchas.org


From: Melody Russo
Re: Electric kiln repair standards

Does anyone (Monona? ) have experience with the ownership and accompanying responsibility for maintenance of electric kilns? Classroom/school district environment preferred.

Are auxiliary certifications required, such as licensed electrician? Is the scenario of teachers following a manual or online/ telephone helpline adequate for safety protection?

What kinds of hazards exist with these kilns?

Thank you!

---
For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org
Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.