From: Bruce Van Scoy <bvanscoy**At_Symbol_Here**TWC.COM>
Subject: [DCHAS-L] CO2 Monitoring in Ultra-Cold Freezer
Date: Fri, 22 Nov 2019 18:23:21 -0500
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Message-ID: 005f01d5a18b$d66f6b90$834e42b0$**At_Symbol_Here**twc.com


Fellow Listers,

I’m wondering if anyone could provide some experience, guidance and incite into the following situation.  I have personnel working in ultra-cold freezers selecting/packing materials into boxes filled with dry ice.  A controller was installed to monitor temperature and CO2 levels with sensors installed.  I am concerned with the CO2 sensor specification in this environment, specifically concerning precision, accuracy and ability to calibrate to respond within an ultracold freezer.  Does anyone have any experience with similar CO2 sensors in this environment? 

Please respond off-line and thank you!

Bruce

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.