About This Archive  | DCHAS-L 2020 Index   | DCHAS-L Yearly Index
person wearing a disposable face shield and surgical style mask

Check out Safety Emporium for your N95, N99, and face shield needs.

Previous by Date:
Subject: [DCHAS-L] EPA: Carbon Tetrachloride Draft Risk Evaluation Available for Public and Scientific Review
Date: Saturday, January 25, 2020 at 5:45:17 AM
Author: DCHAS Membership Chair <membership**At_Symbol_Here**DCHAS.ORG> 		Next by Date:
Subject: Re: [DCHAS-L] Nanotechnology Safety Courses
Date: Sat, 25 Jan 2020 13:40:00 +0000
Author: "Markopoulos, Marjorie Marie"

From: Monona Rossol <0000030664c37427-dmarc-request**At_Symbol_Here**LISTS.PRINCETON.EDU>
Subject: Re: [DCHAS-L] Placement of gas lines and electric outlets on bench/desktops
Date: Sat, 25 Jan 2020 12:10:04 +0000
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Message-ID: 1523269850.9306108.1579954204297**At_Symbol_Here**mail.yahoo.com
In-Reply-To


Didn't know that about you, Rob.  Thanks.  But this is why we sort of have to know a bit about everything in our biz.  

If I were you, I would ask for script clarification as to where this bench is located and what it is supposed to be used for rather that just assuming you could decide the outlets were for nitrogen.  If the purpose of the bench in the script is clearly for items like Bunsen burners, then I'd go to the code for the state the script says the bench is located in.  Then when the right equipment is selected, I'd write an explanation for the choice.  And a PS that if you do this a bunch on this project, you want a mention on the credit roll.

Monona


-----Original Message-----
From: ILPI Support <info**At_Symbol_Here**ILPI.COM>
To: DCHAS-L <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Sent: Sat, Jan 25, 2020 5:41 am
Subject: [DCHAS-L] Placement of gas lines and electric outlets on bench/desktops

I have a customer who does set dressing for medical/science productions (I can imagine Monona's ears pricking up as I write that).

He's making some sort of table/benchtop set and is going to have some deck-mounted valves on the benchtop as well as some deck-mounted electrical boxes.  Neither will really be connected to anything, but as they like to be as realistic as possible, he was wondering if there was any code restriction about the placement of gas outlets with respect to electric outlets.  I suppose if we made the gas valves nitrogen instead of gas, that would get around the issue anyway.

Anyone know the code or have experience with this kind of issue?

Thanks,

Rob Toreki

PS: Worked with a lot of set dressers over the years - NCIS New Orleans, Green Hornet, The Informant, Greeks, The Amazing Race, Take Two, pilot for Close Up- Almost had Breaking Bad on the list but our 12 liter mantles were out of stock when they called.

 ======================================================
Safety Emporium - Lab & Safety Supplies featuring brand names
you know and trust.  Visit us at http://www.SafetyEmporium.com
esales**At_Symbol_Here**safetyemporium.com  or toll-free: (866) 326-5412
Fax: (856) 553-6154, PO Box 1003, Blackwood, NJ 08012




--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas
--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post


The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.