From: "Wright, Mike" <mwright**At_Symbol_Here**USW.ORG>
Subject: Re: [DCHAS-L] DRAFT - Please review and send comments.
Date: Wed, 20 May 2020 14:30:52 +0000
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Message-ID: 72adf3ce70844ee99f9187c3620c4bb5**At_Symbol_Here**usw.org
In-Reply-To


In response to Zabel's request for other guidelines, I'm passing on two factsheets we've developed for our workplaces. The first was issued back in March, and is for local unions whose members remained at work as essential workers. The second was issued about two weeks ago, is a more detailed summary of specific controls, and is also aimed at workplaces which are reopening. Neither was written specifically for laboratories, but some of the measures may be applicable. Neither is intended for health care workers, especially those treating COVID-19 patients, which of course need a much different program. If any of the material is useful, feel free to use it. No attribution necessary.

 

https://www.usw.org/members/coronavirus-resources/resources/covid-19-coronavirus-facts-for-usw-members-a-guide-for-usw-locals-still-at-work

 

https://www.usw.org/members/coronavirus-resources/resources/covid-19-recommended-controls-to-reduce-worker-exposures-to-covid-19

 

Mike

 

 

 

Michael J. Wright

Director of Health, Safety and Environment

United Steelworkers

 

412-562-2580 office

412-370-0105 cell

 

"My friends, love is better than anger. Hope is better than fear. Optimism is better than despair. So let us be loving, hopeful and optimistic. And we'll change the world."

                                                                                                                                                                                         Jack Layton

 

 

 

 

From: ACS Division of Chemical Health and Safety [mailto:DCHAS-L**At_Symbol_Here**PRINCETON.EDU] On Behalf Of Zabel Panosyan
Sent: Tuesday, May 19, 2020 12:04 PM
To: DCHAS-L**At_Symbol_Here**PRINCETON.EDU
Subject: Re: [DCHAS-L] DRAFT - Please review and send comments.

 

Hello,

 Is there a Final Document on Return to work policy that can be used as a guidance for teaching and research labs?

I would like to back up my suggestions to our Safety committee with guidelines established in other organizations.

Thank you.

Zabel.


Zabel Panosyan
Lecturer, Chemistry
Laboratory and Course Coordinator

Departmental Safety Officer

Illinois Institute of Technology
Chemistry Department
3101 South Dearborn Street
Room 160 PS
Chicago, Il 60616

Phone: 312-567-3442

 

 

 

On Mon, Apr 27, 2020 at 3:41 PM Ralph Froehlich <rfroehlich**At_Symbol_Here**helixenv.com> wrote:

DCHAS:

 

I thought that some DCHAS members may be interested in this draft 2020 RETURN TO WORK POLICY & PROGRAM for review & comment. 

 

Maybe if we can agree on a final document, we could issue it as a guidance document for workplaces, schools, universities, research centers, and with modifications, healthcare organizations. It makes more sense to jointly agree on the expectations for return to work, than each individual putting together a program.

 

Ralph A. Froehlich, CIH, CSP, QEP

Helix Environmental, Inc. 

(937) 226-0650 office

 

2020 RETURN TO WORK POLICY & PROGRAM

 

 

PREPARE/CHECK FACILITIES

1.     Verify that all facility systems are operational and correct as needed:

¥Electric

¥HVAC

¥Plumbing

¥Roof/Walls/Windows/Doors

¥Information Technology

¥Fuel Oil/Natural gas

¥Security systems and barriers

¥Fire safety equipment

¥Emergency response equipment

¥Flammable/Toxic Gas monitors/lab hoods/local exhaust ventilation

¥Pollution control equipment

¥Waste, Universal Waste, Hazardous Waste storage and transport

¥Breakroom refrigerators

2.     Clean and disinfect workplace including all surfaces accessible to worker touch. Consider verification testing to ensure disinfection of contact surfaces.

3.     Replenish expired supplies (first aid, eyewash fluids, vending machines, time- or temperature-dependent reagents, bottled drinking water, soap/sanitizer, etc.).

4.     Establish barriers/location marking to identify social distancing expectations and encourage compliance in manufacturing and break areas.

 

ESTABLISH ENTRY SCREENING

1.     Establish acceptable entry screening conditions (temperature/health, reported contact with COVID-19 victims, ordered isolation).

 

             ACCEPTABLE ENTRY CONDITIONS (Adjust as needed)

1.     Body temperature less than 100.4¡F (38¡C)

2.     Entrant in good health/not feeling ill.

3.     No other COVID-19 symptoms in past 7 days (Fever, Headache, Cough, Shortness of Breath, Chills, Muscle Pain, Sore Throat, Loss of smell or taste).

4.     No contact with positive or suspect-positive COVID-19 victims in past 14 days.

5.     Not ordered to quarantine or self-isolate by physician or government agent.

6.     Not traveled on mass transportation in past 14 days.

 

2.     Delineate screening area to maintain social distancing, mark entry line spacing, and provide screening equipment (no-touch thermometers, hand sanitizer, facemasks, gloves, etc.). Consider tents for screening area/wait lines.

3.     Train screeners on required PPE and screening procedures and security personnel on screening security issues.

4.     Provide written instructions to diverted personnel regarding isolation and criteria for discontinuing isolation/return to work policy.

5.     Establish diversion rooms with social distancing for those identified as unacceptable for entry. Make sure that diversion rooms are accessible to exterior.

6.     Provide diverted personnel with transportation to medical services or residence. Ensure that support systems are in place for diverted workers.

 

INFORM SUPERVISORS, WORKERS AND CONTRACTORS

1.     Use direct communication (letters, emails, telephone calls, newspapers, video news, social media) to notify all about restart of facility.

2.     Plan for restart after week DEPENDING ON COVID-19 CONDITIONS. Allow for changes if needed.

3.     Consider pre-work "Open House" to demonstrate new entry requirements and facility entry conditions.

4.     Consider offering employers video tours of entry screening procedures through social media.

5.     Train workers on new work procedures and expectations by video conferencing or accessible video tour. Mark entry stations.

 

SCREEN WORKERS FOR ENTRY

1.     Establish staggered entry times by workgroups to minimize wait times.

2.     Use screening to reinforce additional PPE requirements (safety glasses, hearing protection, etc.)

3.     Anticipate delays and frustrations; use videos and music to reduce tensions.

4.     Ensure that diverted workers are cared for.

 

IDENTIFY PROBLEM AREAS/BOTTLENECKS FOR ATTENTION

1.     Establish command area for problem identification and resolution.

2.     Establish Corrective Action Team to develop and implement improvements.

3.     Use EHS/HR/Maintenance to evaluate improvements before implementation.

4.     Consider legal/insurance evaluation if needed.

--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.