From: Monona Rossol <0000030664c37427-dmarc-request**At_Symbol_Here**LISTS.PRINCETON.EDU>
Subject: Re: [DCHAS-L] Seeking Advice on Respirator Fitness Qualification
Date: Mon, 10 Aug 2020 22:24:34 +0000
Reply-To: Monona Rossol <actsnyc**At_Symbol_Here**cs.com>
Message-ID: 1064358184.735974.1597098274076**At_Symbol_Here**mail.yahoo.com
In-Reply-To


Well that's depressing.  I was informed that a fit tester is not allowed to test someone without certification.  So until I see otherwise in some letter of interpretation or hear it from someone who is still in what's left of OSHA, I'll demur.    Monona


-----Original Message-----
From: Michael Buczynski <mabuczynski**At_Symbol_Here**HOTMAIL.COM>
To: DCHAS-L**At_Symbol_Here**Princeton.EDU
Sent: Mon, Aug 10, 2020 5:37 pm
Subject: Re: [DCHAS-L] Seeking Advice on Respirator Fitness Qualification

Joe
I am a former OSHA  Industrial Hygienist CO. I will tell you to have them fit tested. The spirometer can be validated later in view of the currently. Crisis. The most important thing for now is that they are properly fit tested (passed)

Best to you 
Mike Buczynski
CEO 
PSCR Services Llc

On Aug 10, 2020, at 5:00 PM, Joseph Peters <0000133eb6fa8f3a-dmarc-request**At_Symbol_Here**lists.princeton.edu> wrote:

=EF=BB=BF
 
All of our employees who are required to use respirators have had physicals (including spirometry) to ensure that they are physically able to use an Air Purifying Respirator (APR) and SCBA.  Once they pass the physical, they are fit tested and trained on the proper use and care of the respiratory equipment.
 
We scheduled appoints with our occupational safety and health provider and were told that they are not allowed to conduct spirometry evaluations at this time due to COVID restrictions.
 
Have any members of the group experienced this and if so, how were they able to certify employees for respirator use in the absence of spirometry?
 
BTW, we are located in Massachusetts.
 
Joe
 
 
Joseph C. Peters, PE
Senior Director - Process Technology |  Technip Energies
P  +1 781 340 2901  |  M  +1 617 620 7120
 
TechnipFMC
56 Woodrock Road |  E.. Weymouth, MA |  02189
 
This email has been sent by or on behalf of TechnipFMC plc, a company registered in England and Wales with registered no. 09909709, and with its registered office address at One St. Paul's Churchyard, London, EC4M 8AP, or one of its subsidiaries.
 
 
 
 
From: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**Princeton.EDU> On Behalf Of Ken Kretchman
Sent: Monday, August 10, 2020 3:12 PM
To: DCHAS-L**At_Symbol_Here**Princeton.EDU
Subject: [WARNING - NOT REAL SENDER] Re: [DCHAS-L] Wearing FR masks when working with Pyrophorics during COVID pandemic?
 
------ SECURITY NOTICE ------
TechnipFMC Security Systems have detected that this email might be a scam or a spam.
Disregard this email unless you are confident that it is legitimate. http://protectEmail.technipFMC.com
------ SECURITY NOTICE ------
Hi Margaret
 
We did some testing here at the university some years ago with lab coats and t-butyl lithium following the referenced tragedy.
 
The most striking comparison was a 65-35 polyester /cotton blend which gave a very energetic flame spread vs
100% cotton, Nomex, or other treated fabrics.
 
I would certainly want to stay away from synthetic fabric masks for lab use.
 
Ken
 
Ken Kretchman, CIH, CSP   Director, Environmental Health and Safety
NC State University / Box 8007 / 2620 Wolf Village Way / Raleigh North Carolina 27695-8007
Email: Ken_Kretchman**At_Symbol_Here**ncsu.edu / Phone: (919).515.6860 / Fax: (919).515.6307
 
 
On Mon, Aug 10, 2020 at 2:18 PM James Keating <james.k.keating**At_Symbol_Here**gmail.com> wrote:
If you are working with phosphoric you need serious fire resistant PPE. Also limited amount of flammable material in hood area as well as in the cabinet under the hood. 
 
Remember the Sherry Sanji tragedy.
 
Jim Keating 
 
On Mon, Aug 10, 2020, 1:55 PM Margaret Rakas <mrakas**At_Symbol_Here**smith.edu> wrote:
For those organic synthesis research labs, is your EHS department recommending fire-resistant face masks?  Or 100% cotton? 
 
Many thanks
Margaret
 
--
Margaret A. Rakas, Ph.D.
Lab Safety & Compliance Director
Clark Science Center
413-585-3877 (p)
--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas
--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas
--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas
--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas
--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas
--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.