From: Ken Kretchman <kwkretch**At_Symbol_Here**ncsu.edu>
Subject: Re: [DCHAS-L] Nickel Carbonyl
Date: Mon, 17 Aug 2020 09:14:54 -0400
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**Princeton.EDU>
Message-ID: CAOYSQ4-Na6zwFC2YngHFVGa9UVgLnh-XnQa+hfHgCNStLFrjrg**At_Symbol_Here**mail.gmail.com
In-Reply-To


Hi Neal

I "almost" agree. I am not sure Jim said a specific "no" and I think some of these decisions need to go beyond the PI, who may or may not be able (in the opinion of
EHS, PI mgt, and site mgt for something of this nature) to be able to consistently handle the necessary precautions and controls.

I do agree that providing the PI with what needs to be done to achieve the mission safely is the best way to go.

thanks
Ken
Ken Kretchman, CIH, CSP Director, Environmental Health and Safety
NC State University / Box 8007 / 2620 Wolf Village Way / Raleigh North Carolina 27695-8007
Email: Ken_Kretchman**At_Symbol_Here**ncsu.edu / Phone: (919).515.6860 / Fax: (919).515.6307


On Sun, Aug 16, 2020 at 9:46 PM NEAL LANGERMAN <neal**At_Symbol_Here**chemical-safety.com> wrote:
Jim
While I agree that proper and safe handling of nickel carbonyl is expensive I must caution all that the job of EHS is to present how to do the job safely. It is not to decide the cost benefit ratio. That is the responsibility of the PI. We routinely work with extremely toxic chemicals, arsine for example. As Eugene pointed out, there is not a real time detection system, so the suite of controls offered to the PI is more complicated.

In summary, our job does not include "NO".
NEAL


Sent from Neal Langerman's NEXUS 6.
Standard client confidentiality terms apply.

On Sun, Aug 16, 2020, 17:07 James Keating <james.k.keating**At_Symbol_Here**gmail.com> wrote:
RE: Tetra nickel carbonyl

"Merely..."very difficult to achieve any other way" does not seem to be enough to justify using Nickel Carnonyl in a process system.

Review of the SDS should reveal the extreme exposure risk associated with this compound.

In addition to toxicity there is the fire and explosion risk as well as the s.g. of the vapor 6 times air.

The hazards inherent in this compound even require careful process controls using steel piping in systems that could possibly generate Nickel Carbonyl resulting from the kinetic and thermodynamic parameters in process systems including certain piping materials containing the flow of chemicals capable combining to create tetra nickel Carbonyl.

The cost of containing this compound and protecting personnel from exposure would, in my opinion, exceed the cost of available alternatives.

Jim Keating





On Sat, Aug 15, 2020, 4:32 PM davivid <davivid**At_Symbol_Here**well.com> wrote:
I have a client in California who is considering using a process that
uses nickel carbonyl. I have made them aware of the extremely toxic
nature of this compound. The only reason they are considering it is that
it solves a problem that would be very difficult to achieve any other
way. My question to the community is this: what, if any, specific
regulations are there regarding the use of this compound?

Thank you

Dave Lane
Principal
Clavis Technology Development

---
For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org
Follow us on Twitter **At_Symbol_Here**acsdchas
--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas
--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas
--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.