From: Dr Bob <drbob**At_Symbol_Here**FLOWSCIENCES.COM>
Subject: Re: [DCHAS-L] Lab Ventilation
Date: Tue, 23 Feb 2021 15:40:05 +0000
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**Princeton.EDU>
Message-ID: BN8PR07MB6340EA03397A1478580C327ED9809**At_Symbol_Here**BN8PR07MB6340.namprd07.prod.outlook.com
In-Reply-To


 

 

Hi Stephen!

 

See answers in red below:

 

  1. What minimum air changes per hour (ACH) do you require for the following laboratories while occupied?

Answers below are dominated by lab exhaust in the labs, so my comments are centered on this issue. As you know, ACH numbers are generally set when lab is built. Regardless of what you are doing, you should accommodate existing lab practices based upon what ACH lab is operating at because you cannot easily adjust ACH without domino-like repercussions. Maximum sash opening, storage of flammables, policing lab door openings ,etc, etc is best way to maximize containment for more dangerous chemicals using whatever ACH you have. 6 ACH is very low and should never be used, although many education labs are now sized this way to “save energy”.

For new labs, one should always devise a system assuming usages may change. I personally believe minimum 10 ACH is better, but you may have trouble establishing this for new labs.

 

Instructional/teaching lab

    • High risk research lab
    • Low risk research lab

Follow up – what criteria do you use to classify high risk vs low risk research labs?

  1. Do you reduce the ACH for unoccupied laboratories? See #1. Remember thermostatic control is linked to ACH.
  2. Has anyone done Computational Fluid Dynamic (CFD) analysis of their typical labs to validate that the air flow rates and directions are sufficient? EH Price has done some work on this in Canada. Before CFD, one should calculate air in vs. air out. CFD might be useful, but only if thermostatic control is stable and present.

You might wish to see following links for more specific answers:

 

https://pubs.acs.org/doi/pdf/10.1021/acs.chas.9b00013

 

https://www.pharmaceuticalonline.com/doc/common-fume-hood-containment-problems-0001

 

Best of luck on your review; I wish I could have more specific!

 

Dr. Bob Haugen

Director of Product and Technology Development

Flow Sciences, Inc.

 

910 332 4878

 

www.flowsciences.com
 Linkedin  – Facebook – YoutubeTwitter

Customer Satisfaction Survey

 

CONFIDENTIALITY NOTE: This e-mail, including all attachments, is directed in confidence solely to the person(s) to whom it is addressed, or an authorized recipient, and may not otherwise be distributed, copied or disclosed. The contents of this transmission may also be subject to intellectual property rights and all such rights are expressly claimed and are not waived. The contents of this e-mail do not necessarily represent the views or policies of Flow Sciences Inc. or its employees.

 

 

From: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**Princeton.EDU> On Behalf Of Stephen Beaton
Sent: Tuesday, February 23, 2021 9:30 AM
To: DCHAS-L**At_Symbol_Here**Princeton.EDU
Subject: [DCHAS-L] Lab Ventilation

 

Good morning all:

 

A similar topic on lab ventilation came up in DCHAS a number of years back, but I would like to dig a bit further. I am interested in your thoughts and feedback, especially if any new recommendations/best practices have been made, particularly in academic laboratories.

  1. What minimum air changes per hour (ACH) do you require for the following laboratories while occupied?
    • Instructional/teaching lab
    • High risk research lab
    • Low risk research lab

Follow up – what criteria do you use to classify high risk vs low risk research labs?

  1. Do you reduce the ACH for unoccupied laboratories?
  2. Has anyone done Computational Fluid Dynamic (CFD) analysis of their typical labs to validate that the air flow rates and directions are sufficient?

I’m reviewing our current practices, and looking at adopting from ANSI Z9.5 2012 and ASHRAE TC9.10 (some familiar names as contributors).

 

Your comments are greatly appreciated.

Steve

 

 

Stephen Beaton, MSc, CHO, CRSP
Chemical Safety Manager
Environmental Health and Safety Office

DALHOUSIE UNIVERSITY
902..494.1934

 

--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.