From: Tammy M. Lutz-Rechtin <tlutzrec**At_Symbol_Here**UARK.EDU>
Subject: [DCHAS-L] Mg pellet safety
Date: Tue, 23 Feb 2021 17:19:08 +0000
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**Princeton.EDU>
Message-ID: SA0PR04MB7449BB499DB83FBCC899622ABA809**At_Symbol_Here**SA0PR04MB7449.namprd04.prod.outlook.com


Does anyone have experience using Mg pellets safely, not for an ignition source, and its storage. Looking for Mg pellets with an oxide coating but all I can find are suppliers that ship under Argon. Please private email me tlutzrec**At_Symbol_Here**uark.edu

Tammy Rechtin, Ph.D.
Chemical Engineering Safety Coordinator
Ralph E. Martin, Department of Chemical Engineering
University of Arkansas
Email: tlutzrec**At_Symbol_Here**uark.edu

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.