From: Chandra Man Karki <karki**At_Symbol_Here**UCHICAGO.EDU>
Subject: Re: [DCHAS-L] Question for posting on DCHAS List
Date: Wed, 17 Mar 2021 19:52:57 +0000
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**Princeton.EDU>
Message-ID: SN6PR11MB3472F544A5AD63F3C7A65525C76A9**At_Symbol_Here**SN6PR11MB3472.namprd11.prod.outlook.com
In-Reply-To <49f13d08469e4fe1ad05e8317f2a75fc**At_Symbol_Here**oc11expo11.exchange.mit.edu>


Hello Todd,

Currently, I'm also assisting one of the PIs to write SOP for the pressure vessel (>15 PSI). Pressure vessels are regulated by state law if the pressure is greater than 15 psi (for most states). Your state fire marshal (division of boilers and pressure vessel) is the best resource in this case.

-Chandra Man

 

Chandra Man Karki, M.S.

Chemical Safety Officer (CSO)

Office of Research Safety, University of Chicago

researchsafety.uchicago.edu

920 E. 58th St, CLSC 145, Chicag, IL 60637

Office Ph: (773) 702-5907

"Safety isn't expensive, it's priceless"- Jerry Smith

UCHICAGO COVID update: https://goforward.uchicago.edu/  

 

 

 

 

From: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**Princeton.EDU> On Behalf Of Todd Numan
Sent: Wednesday, March 17, 2021 11:16 AM
To: DCHAS-L**At_Symbol_Here**Princeton.EDU
Subject: [DCHAS-L] Question for posting on DCHAS List

 

Good Afternoon,

 

My name is Todd Numan and I am an EHS Safety Officer at MIT.  I am in the process of updating some of our program guidance documents on pressure vessel use and was hoping that I could have a question posted on the DCHAS list for comments.  We have current list members on my team so I will have access to any comments or conversations.

 

The following question is what I was hoping to have posted;

 

-      We are currently in the process of updating our pressure vessel program guidance documents and would like to benchmark against best practices from other universities.  For those of you that have a pressure vessel program, what techniques do you use to track and monitor researcher built systems, and what is your criteria for categorizing low/medium/high hazard potentials?

Please let me know if you have any questions or concerns.

Best,

Todd

 

     Todd Numan

     EHS Safety Officer

 

    Environment, Health and Safety Office

     Massachusetts Institute of Technology

     Office -  (617)258-8101

     Mobile- (617)335-7439

 

**Safety should not be considered a priority but a value with no compromise**

 

 

--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.