From: Yaritza Brinker <YBrinker**At_Symbol_Here**FELE.COM>
Subject: Re: [DCHAS-L] heating/cooling issues
Date: Thu, 15 Apr 2021 13:06:37 +0000
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**Princeton.EDU>
Message-ID: DM6PR05MB7052F10A4A3CF88399D11AFCAD4D9**At_Symbol_Here**DM6PR05MB7052.namprd05.prod.outlook.com
In-Reply-To


Yes, and we did that too to some extent. The particular equipment that gave me issues was designed to use the room’s air to cool UV lamps… very hot UV lamps. So, we had no option but re-do a portion of the duct work.

 

Thank you,

 

Yaritza Brinker

260.827.5402

 

From: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**Princeton.EDU> On Behalf Of Dr Bob
Sent: Wednesday, April 14, 2021 6:16 PM
To: DCHAS-L**At_Symbol_Here**Princeton.EDU
Subject: Re: [DCHAS-L] heating/cooling issues

 

** External Email **

 

 

 

 

Sent from my Samsung Galaxy , an AT&T LTE smartphone

Hi Yarttza!

 

It is possible to use an inclosed cabinet to house heat emitting electronics snd control heat distriburion while saving HVAC.

 

 

-------- Original message --------

From: Yaritza Brinker <YBrinker**At_Symbol_Here**FELE.COM>

Date: 4/14/21 5:17 PM (GMT-05:00)

To: DCHAS-L**At_Symbol_Here**Princeton.EDU

Subject: Re: [DCHAS-L] heating/cooling issues

 

The last lab remodel I oversaw, needed to include ventilation upgrades to meet the room temperature requirements of heat generating test equipment. The equipment manuals were my best tool in getting that done. Scientific principles would have been my worst tool to use.

 

OSHA standard is silent on indoor temp/humidity requirements. There’s an OSHA letter that states temp/humidity is a matter of “comfort” and although they do have recommendation, they won’t enforce it. However, OSHA standard does have inhalation limits. Since evaporation rates go up when RT goes up. You could argue that constant temperature and ventilation have a synergistic effect on reducing the inhalation exposure. You could go as far as presenting some hypothetical calculations using select chemicals in your stockroom.

 

OSHA does mention uncomfortable indoor temps when talking about ergonomics. See Appendix III:2-1 of OSHA Technical Manual (OTM) Section III: Chapter 2

https://www.osha.gov/otm/section-3-health-hazards/chapter-2

 

You might find the seemingly brush-off answer has a deeper root on something that isn’t easily fixable. If you can get them to talk candidly, they’ll probably tell you what information they need from you to justify changes and secure funds.

 

Thank you,

 

Yaritza Brinker

260.827.5402

 

From: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**Princeton.EDU> On Behalf Of Rakers, Rosemary S.
Sent: Wednesday, April 14, 2021 12:46 PM
To: DCHAS-L**At_Symbol_Here**Princeton.EDU
Subject: [DCHAS-L] heating/cooling issues

 

** External Email **

Hello all,

 

I am looking for resources, personal experience, anything that will help me with talking to facilities about maintaining an appropriate temperature in a science building. Obviously temperature (and humidity) are a concern. We can all agree that climate change is a thing and that we are going to get fluctuations in temperature. I’m having a difficult time convincing some people in facilities that having high temperatures in a science building is more than just an inconvenience. I’m looking for documentation, anything that will help my cause in convincing them that when we reach high temps (we were at 89.6 F last week in my flammable storage room) something needs to be done.

 

I’ve been searching the DCHAS website but not finding what I am looking for. I’ve looked at SDS’s until I am blue in the face, but they tend to say “keep in a cool, well-ventilated location”. What does “cool” mean? Facilities tells me I should move all my chemicals to a refrigerator when it gets hot. Obviously that is not feasible.

 

Any insight you can provide is a appreciated.

Thank you.

Rose

 

 

 

Rose Rakers, Ph.D.

Director of Chemical Laboratories & Chemical Hygiene Officer

Benedictine University

5700 College Rd

Lisle, IL 60532

630-829-6571

 

--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas




Electronic Transmission Confidentiality Notice

The information contained in this electronic transmission is private, confidential, the property of the sender, and intended for the use of the recipient(s), only. If you are not the addressee, any disclosure, copying, distribution or use of this information for any purpose is strictly prohibited. If you have received this information in error, please notify the sender, YBrinker**At_Symbol_Here**fele.com, immediately by e-mail and then delete this message. Thank you.
[FE.EN.1]

--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.