07/10/1992 - MSDS labelling requirements

Interactive Learning Paradigms, Incorporated

	The Home page of ILPI's Safety Data Sheet (SDS) Resource, the leader in SDS information since 1995!
	The history and philosophy behind this resource.
	A curated collection of books and reference materials concerning Safety Data Sheets and closely related topics.
	Paste your plain text SDS into the SDS-Demystifier, and it will be converted into a hypertext-enriched document with links to detailed explanations of each key term.
	An extensive list of frequently asked questions about Safety Data Sheets including regulations, content, compliance, and more.
	A humorous take on Safety Data Sheet jargon. Fill in the blanks on our entry form to generate a personalized Unsafety Data Sheet to share with your coworkers.
	Since 1995, we've maintained this massive curated list of the best places to find Safety Data Sheets on the Internet.
	Way more than a glossary, this hypertext-enhanced resource covers hundreds of SDS-related terms and expert knowledge. Each entry includes both the SDS relevance and links to additional authoritative resources.
	Archived results of Safety Data Sheet related polls taken by some of our millions of site visitors
	You are here! The OSHA regulations behind SDS regulations, including the inspection guidelines and over 400 official interpretations letters under the Hazard Communication Standard
	Commercial suppliers of SDS authoring and management software as well as cloud compliance services.
	Commercial companies that will create SDS's for your specific needs as well as SDS translation companies.

Safety signs, banners, and scoreboards? Get yours at Safety Emporium!

XXXPrevNext

Title: 07/10/1992 - MSDS labelling requirements.
Record Type: Interpretation	Standard Number: 1910.1200(g)

July 10, 1992

Thomas A. Dawson, D.D.S., P.C.
508 M-55
Tawas City, Michigan 48763

Dear Dr. Dawson:

This is in response to your letter dated February 10, to the Michigan Department of Public Health concerning requirements for rating of hazards on Material Safety Data Sheets (MSDS). Your letter was referred to the Occupational Safety and Health Administration (OSHA) for a response since you recommended that these hazard ratings be included as part of the MSDS requirements of the Federal Hazard Communication standard.

The Hazard Communication standard allows any labeling format to be used, as long as the labels include the basic required information regarding the chemical, i.e., the identity, the appropriate hazard warning(s), and the name and address of the chemical manufacturer. As indicated by the Michigan Department of Public Health, numerical rating or color-coded labels are strictly a voluntary, optional means of identifying hazards of materials. We are aware that a number of dentists have purchased compliance packages that include such labels, but it is not necessary to re-label containers received from manufacturers to indicate numerical ratings or color codes. Furthermore, you may use information from the manufacturer's label to label other containers in the workplace into which you transfer chemicals. As numerical ratings or color codes are not required under OSHA's labeling provisions, the Agency has no plans to consider modifying the MSDS provisions to add this information.

This handy poster explains the common hazardous chemical labeling systems. Get yours at Safety Emporium.
As you know, the State of Michigan is administering its own occupational safety and health program under a plan approved and monitored by Federal OSHA. States are required to adopt occupational safety and health standards at least as effective as those promulgated by Federal OSHA. Michigan has adopted a rule identical to the Federal which applies to all employers with employees exposed to hazardous chemicals in the workplaces. Thus, the Michigan Hazard Communication standard is currently in effect in your state.

In addition, Michigan offers free on-site consultation services to those employers who request guidance on compliance with occupational safety and health standards. For information regarding either the consultation services or the requirements of the Michigan Hazard Communication Standard, you should contact:

Sincerely,

Bruce Hillenbrand, Director
Federal-State Operations

May 19, 1992

Thomas A. Dawson, D.D.S., P.C.
508 M-55
Tawas City, Michigan 48763

Dear Dr. Dawson:

I sincerely apologize that your original letter of February 10 did not receive a response. It appears that someone here did not believe a reply was necessary or expected.

As both of your letters indicate, you have properly directed your recommendations regarding Material Safety Data Sheets (MSDS) to the Federal Occupational Safety and Health Administration (OSHA). They were the authors of the hazard communication regulations which were adopted by reference in Michigan by an act of the state legislature. While Michigan may specify requirements different than OSHA's, such requirements would need to be established by the legislature, not MIOSHA administrators.

In order for your recommendations to be effective, it would require all writers of MSDSs to comply, not just the small percentage subject to MIOSHA regulations. Further, as I am sure OSHA will agree, the number/color-coded labels are strictly a voluntary, optional means of identifying hazards of materials.

In writing the Hazard Communication Standard, OSHA sought to require a simple yet effective means of labeling hazardous materials. While the codes are simple, there are several arguments that they are not effective. Therefore, OSHA requires the label to identify the material (give it a name which will match the name on its MSDS) and relate through short, simple and direct written statements what is the nature of the hazard. Particularly in the area of health hazards or toxicity, number/color codes do not adequately inform workers of the true nature of the hazard. Also, Federal OSHA is currently reviewing their Hazard Communication Standard. They are considering a standardized format for all MSDSs.
We believe the present labeling requirements, if conscientiously followed by manufactures of hazardous materials, will do the intended job of communicating hazards to employees much better than any of the number-code systems in use. The failure in the prescribed labeling is our inability to effectively enforce proper labeling on all manufacturers.
Thank you for your letter and interest in this matter; and again, please accept our apology for the delayed response.

Safety Emporium has all kinds of labels for assisting with your OSHA compliance needs.

Sincerely,

BUREAU OF ENVIRONMENTAL
AND OCCUPATIONAL HEALTH
John R. Peck,
Acting Chief
Office of Special Programs
Division of Occupational Health

JHP:ch

February 10, 1992

U.S. Department of Labor
Occupational Safety and Health Administration
801 South Waverly Road,
Suite 306
Lansing, Michigan 48917-4200

Division of Occupational Health Bureau of Environmental and Occupational Health 3423 North Logan Post Office Box 30195 Lansing, Michigan 48909

CERTIFIED -- RETURN RECEIPT REQUESTED

Gentlemen:

We are constantly striving in our office to ensure that we are in compliance with the regulations and requirements of OSHA/MIOSHA, not only because it is the law, but also because we want our office to be the safest work environment that it can possibly be.

Teach your employees about MSDS's with posters and pamphlets from Safety Emporium.
I am writing today to bring to your attention an area of concern that has arisen in reference to the requirement for Material Safety Data Sheets (MSDSs) for all chemicals used in our office. We have found that in the vast majority of cases, the manufacturers do not "rate" the hazards on their MSDS sheets (insofar as the color coded labels require--fire hazard, health hazard, reactivity, etc.) We are left to try to understand these sheets and rate the products as best we can (and this sometimes seems to require an advanced chemistry degree).
It is our suggestion that you consider a requirement that the rating be shown on the MSDS sheets, on the boxes that the products are shipped in, individual boxes the products are packaged in, and also the individual containers of each product, so that ACCURATE labeling can take place within the office setting, and that the warning labels we attach to the products will truly assist us in knowing the true dangers, or lack thereof, of the products concerned.

I thank you for your consideration and attention to this request.

Sincerely,

Thomas A. Dawson, D.D.S., F.A.G.D.

TAD/pvo

PC: Michigan Dental Association

This hypermarked and content-enhanced page is copyright by ILPI, all rights reserved. Unauthorized duplication or posting on other web sites is expressly prohibited. For questions, comments and concerns, please contact us at our SDS email address.

The original official public domain version of this document is available from OSHA at XXXOSHAURL.