From:
Rob Toreki <info**At_Symbol_Here**ILPI.COM>
Subject:
[DCHAS-L] Laboratory signoff consulting opportunity in southern New Jersey
Date:
Aug 4, 2026 20:38 UTC
Reply-To:
ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
In-Reply-To:
I received the following request today for a consultant to visit a laboratory in southern New Jersey and verify/certify that it’s up to spec before going into operation:
We are specifically addressing third party consultation regarding:
1. Verification of safety of Laboratory fume hood exhaust design (roof top location) as it applies to International Mechanical Code;
2. Design of laboratory analytical gas supply from manifold and piping to ceiling panels and point of use panels; alarm functions on manifolds; and recommendations of plumbing the same.
3. Overall functional verification for fit-of-use.
Any suggestions you might have on who would be best-positioned to support this request is greatly appreciated, and their contact information will be passed on to our customer for direct contact.
I know a couple of you are ideally suited for this. If you’d be interested in this gig, please contact me off-list.
Best wishes,
Rob Toreki
LabLocks™ - The first device that can lock out standard laboratory ball valves: https://www.safetyemporium.com/07400
US-Made NIOSH and FDA-approved N95 respirators: https://www.safetyemporium.com/safety-items/respirators/
Safety Emporium - Laboratory and Safety Supplies https://www.SafetyEmporium.comesales**At_Symbol_Here**safetyemporium.com or toll-free: (866) 326-5412Fax: (856) 553-6154, PO Box 1003, Blackwood, NJ 08012