DCHAS-L Archives · Post dated October 7, 2026
From: rpalluzi**At_Symbol_Here**verizon.net <000006c59248530b-dmarc-request**At_Symbol_Here**LISTS.PRINCETON.EDU>
Subject: Re: [DCHAS-L] Epoxy painting soapstone chemical fume hood surface
Date: Oct 7, 2026 15:28 UTC
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
In-Reply-To: [DCHAS-L] Epoxy painting soapstone chemical fume hood surface
Richard Palluzi
Richard P Palluzi LLC
72 Summit Drive
Basking Ridge, NJ 07920
rpalluzi**At_Symbol_Here**verizon.net
908-285-3782
https://www.linkedin.com/in/richardppalluzillc/
Good afternoon DCHAS,
I’m wondering if any of you have any experience painting / resealing natural stone work surfaces in chemical fume hoods. A laboratory has three aging hoods that cannot be readily replaced. Considerations have included an epoxy-based sealant / paint OR installation of a ~16 gauge stainless steel sheet. Of course these cannot affect designed airflow, sash movement, etc.
We are awaiting confirmation that their scope of work will not increase beyond fine powders (metals, salts, silica), oils (mineral mostly), and cleaning solutions (soap, ethanol/IPA). I have also asked for the specific product(s), manufacturers literature on intended use and chemical resistance, as well as their contractors experience using such materials on natural stone work surfaces.
Any thoughts, ideas, or experience from the group?
Thank you in advance for your time and consideration.
Best,
-P
|
|
Paul R. Emery, MSc Safety Advisor - Chemical Safety Specialist
Yale Environmental Health and Safety 135 College Street, Suite 100 New Haven, CT 06510 Phone (203) 737-3521 Mobile (475) 261-6163 |
