DCHAS-L Archives Nov 25 2005 - Re: Testing Eyewashes for Flow Rate

DCHAS-L Discussion List Archive

Previous by Date:
Subject: Re: safety shower location
Date: Wed, 23 Nov 2005 17:11:33 -0500
Author: Jay Young

Next by Date:
Subject: Re: [CSHEMA-L] safety shower location
Date: Fri, 25 Nov 2005 17:45:36 EST
Author: CIHSHOO**At_Symbol_Here**AOL.COM

Demystify:

Date: Fri, 25 Nov 2005 17:40:57 EST
Reply-To: CIHSHOO**At_Symbol_Here**AOL.COM
Sender: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
From: CIHSHOO**At_Symbol_Here**AOL.COM
Subject: Re: Testing Eyewashes for Flow Rate
Comments: To: info**At_Symbol_Here**ILPI.COM

Another simple test metod would be to measure the size of the diameter of  
the orifice and the height of the fountain.  Then use a modified weir  height 
formula to calculate pressure and flow rate.

Previous post | Top of Page | Next post

The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary**At_Symbol_Here**dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.

Interactive Learning Paradigms, Incorporated

DCHAS-L Discussion List Archive