DCHAS-L Discussion List Archive
Date: Thu, 28 Jan 2010 20:59:26 -0800
Reply-To: neal**At_Symbol_Here**chemical-safety.com
Sender: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
From: Neal Langerman <neal**At_Symbol_Here**CHEMICAL-SAFETY.COM>
Organization: ADVANCED CHEMICAL SAFETY
Subject: Re: Ether - Motor Priming Grade
In-Reply-To: <48062557AFEAED449277EA54A8E1658B146367F100**At_Symbol_Here**sdsmt-ex07>
Motor Priming Grade is lower than Technical, very dirty. It (most
likely)
is in an aerosol can. Given this, it cannot form peroxides and does not
warrant special treatment ..............
I would use to start a chain saw on a cold day without worry
-------------------------------------------------------------------------
---
--------
The information contained in this message is privileged and confidential
and
protected from disclosure. If the reader of this message is not the
intended
recipient, or an employee or agent responsible for delivering this
message
to the intended recipient, you are hereby notified that any
dissemination,
distribution or copying of this communication is strictly prohibited. If
you
have received this communication in error, please notify us immediately
by
replying to the message and deleting it from your computer.
=A0
NEAL LANGERMAN
ADVANCED CHEMICAL SAFETY, Inc.
7563 CONVOY Ct
SAN DIEGO CA 92111
(858) 874 5577 (phone, 24/7)
(858) 874 8239 (FAX)
www.chemical-safety.com
-----Original Message-----
From: DCHAS-L Discussion List [mailto:DCHAS-L**At_Symbol_Here**list.uvm.edu] On Behalf Of
Roberts, Jerilyn C.
Sent: Thursday, January 28, 2010 2:39 PM
To: DCHAS-L**At_Symbol_Here**LIST.UVM.EDU
Subject: [DCHAS-L] Ether - Motor Priming Grade
Does anyone have any information on Humco Laboratories Ether Motor
Priming
Grade? We are working on moving to a new building and it was found in a
cabinet. All it says is "ether", but I am not familiar with motor
priming
grade. I am treating with extreme caution. Any information would be
greatly appreciated.
Thanks.
Jerilyn Roberts
Environmental Health and Safety Director
South Dakota School of Mines and Technology
501 East St. Joseph Street
Rapid City, SD 57701-3995
605 394-6729
605 394-6131 FAX
Jerilyn.Roberts**At_Symbol_Here**sdsmt.edu
Previous post | Top of Page | Next post
