Date: Tue, 16 Mar 2010 10:47:52 -0700
Reply-To: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
Sender: DCHAS-L Discussion List <DCHAS-L**At_Symbol_Here**LIST.UVM.EDU>
From: "Debbie M. Decker" <dmdecker**At_Symbol_Here**UCDAVIS.EDU>
Subject: vacuum line contamination?
Comments: To: Laboratory Safety

Hi Gang:

A project manager has just asked me for some sort of clearance/cleaning procedure for vacuum lines in a lab renovation project.& nbsp; I’m inclined to tell them to flush out the lines with hot soapy water , rinse thoroughly and then set about whatever they need to do to remove/reconfigure the vacuum system.

Anybody else have any other bright ideas?

As always, they’re under construction and this r equest will be holding up progress <sigh>.




Debbie M. Decker, Campus Chemical Safety Officer
Environmental Health and Safety
University of California, Davis
1 Shields Ave.
Davis, CA  95616
(530)754-7964/(530)752-4527 (FAX)
Co-Conspirator to Make the World A
Better Place -- Visit and join the conspira cy

Previous post   |  Top of Page   |   Next post

The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.