From: "George D. McCallion" <medchem**At_Symbol_Here**COMCAST.NET>
Subject: [DCHAS-L] Fire Extinguisher placements
Date: December 18, 2012 9:22:11 AM EST
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: <5117517A15F08343A243D1DEFBE6BE4C44A5BF55**At_Symbol_Here**>

Good morning,


I send this question regarding a recent internal audit of our cGMP facility. There is a recently constructed hallway which runs 70' and does a 90-degree "L-turn" to a 15' hallway.


We currently have one extinguisher at the end of the 70' hallway. I feel that a second extinguisher should be placed atthe end of the 15' section as well.


Can anyone provide guidance, or an NFPA reference?


Thank you in advance.


George D. McCallion

QA Reviewer, Quality and Compliance

QS Pharma, LLC

3 Chelsea Parkway, Suite 305

Boothwyn, PA 19061

Mobile: 610.888.2436

Office: 610.485.4270, ext. 245


Previous post   |  Top of Page   |   Next post

The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.