From: "Reinhardt, Peter" <peter.reinhardt**At_Symbol_Here**YALE.EDU>
Subject: Re: [DCHAS-L] ANSI/ASHRAE 110 standard revised
Date: Thu, 5 May 2016 16:31:57 +0000
Reply-To: DCHAS-L <DCHAS-L**At_Symbol_Here**MED.CORNELL.EDU>
Message-ID: BY2PR08MB0483DC783C96FA3F9B7C29C927C0**At_Symbol_Here**



Does anyone have a summary of the changes that were made compared to the previous standard?


Pete, Yale EHS


From: DCHAS-L Discussion List [mailto:dchas-l**At_Symbol_Here**MED.CORNELL.EDU] On Behalf Of Ellen M. Sweet
Sent: Wednesday, April 27, 2016 3:47 PM
Subject: [DCHAS-L] ANSI/ASHRAE 110 standard revised


Hi everyone,

I just received a notice that the AHSRAE 110 standard for testing the performance of laboratory fume hoods has been revised.




Ellen Sweet

Laboratory Ventilation Specialist

Department of Environmental Health and Safety

Cornell University



Previous post   |  Top of Page   |   Next post

The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.