From: "Markopoulos, Marjorie Marie" <marjorie.markopoulos**At_Symbol_Here**WRIGHT.EDU>
Subject: [DCHAS-L] Art Studio Kiln Safety and Design Information
Date: Fri, 23 Feb 2018 16:02:03 +0000
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU>
Message-ID: 27E6414D-74A0-49ED-BAF3-04ABC8ECA5DB**At_Symbol_Here**

Does anyone have any lessons learned or comments regarding Fine Arts Sculpture Studio kiln and furnace operations? I'd like to hear comments about indoor vs. outdoor facilities and other safety/security recommendations.


Marjorie Markopoulos, Ph.D.

Department of Environmental Health and Safety

3640 Colonel Glenn Hwy | Dayton, OH 45435-0001 | Phone: 937.775.2797






Previous post   |  Top of Page   |   Next post

The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.