From: DAVID Katz <DAKATZ45**At_Symbol_Here**MSN.COM>
Subject: Re: [DCHAS-L] lab help for student with prosthetic hand
Date: Thu, 18 Mar 2021 23:09:21 +0000
Reply-To: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**Princeton.EDU>
Message-ID: MN2PR15MB3711823EDA3F0437E039618BC5699**At_Symbol_Here**MN2PR15MB3711.namprd15.prod.outlook.com
In-Reply-To


Use lead cuffs and lead donuts, not lead rings.  The "cuffs" and "donuts" were developed by I2R Company in suburban Philadelphia.  They are now available from Glas-Col.  These are "C" shaped and can be adjusted to fit various types of glassware, including beakers.  Being made of a plastic coated lead, they are heavy.  They are a little pricey, but safety shouldn't be limited by price.
 
David
_________________________________________________________________________
 
  David A. Katz             
  Chemist, Educator, Expert Demonstrator, Science Communicator, and  Consultant
  Programs and workshops for teachers, schools, museums, and the public
  5003 Canby Dr. * Wilmington, DE 19808-1102 *  USA
  voice/fax: (302) 509-3282 * email: dakatz45**At_Symbol_Here**msn.com
           Visit my web site:  http://www.chymist.com
_________________________________________________________________________
----- Original Message -----
From: Dan Nowlan
To: DCHAS-L**At_Symbol_Here**Princeton.EDU
Sent: Thursday, March 18, 2021 3:25 PM
Subject: Re: [DCHAS-L] lab help for student with prosthetic hand

What about lead rings for water baths?  Obviously, they would be more effective with Erlenmeyers and graduated cylinders than with beakers, for instance, but they should be better than nothingÉat least in the interim.

 

Dan

 

From: ACS Division of Chemical Health and Safety [mailto:DCHAS-L**At_Symbol_Here**Princeton.EDU] On Behalf Of Patrick A Ceas
Sent: Thursday, March 18, 2021 2:10 PM
To: DCHAS-L**At_Symbol_Here**Princeton.EDU
Subject: [DCHAS-L] lab help for student with prosthetic hand

 

Hi all,

 

A student's prosthetic hand has been damaged (not lab related) and unfortunately they now have very limited ability to grasp/steady items such as graduated cylinders, flasks, etc.  Does anyone know of some sort of countertop item that could help stabilize graduated cylinders and other "tippy" items?  I can imagine a few creative designs but I would rather have a commercial ADA-type product if possible.  I've done a small bit of online searching but no luck so far; I'm probably not using the correct search words.

 

Thanks

 

Pat

 


--

Patrick Ceas, Ph.D.

Chemical Hygiene Officer | Environmental Health & Safety

https://wp.stolaf.edu/brand/files/2018/01/Primary-Logo-on-White.jpg

Office: 507-786-3560 | Mobile: 507-321-0379

312 Regents Hall of Natural Sciences

1520 St. Olaf Avenue Northfield, MN 55057

--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org Follow us on Twitter **At_Symbol_Here**acsdchas

Previous post   |  Top of Page   |   Next post



The content of this page reflects the personal opinion(s) of the author(s) only, not the American Chemical Society, ILPI, Safety Emporium, or any other party. Use of any information on this page is at the reader's own risk. Unauthorized reproduction of these materials is prohibited. Send questions/comments about the archive to secretary@dchas.org.
The maintenance and hosting of the DCHAS-L archive is provided through the generous support of Safety Emporium.