Hi Ruth,

For natural gas, the sensor is built right into the human olfactory gland. There are mercaptans in the gas that will aid any human in detecting a leak at the ppm level. Action must be taken immediately, humans can quickly become acclimated.

 

For LN2 it depends on the volume, a few liters should no be a big deal, now if you have 100L or more, and a leak can displace all breathable oxygen, then you might want to consider having a hardwired continuous oxygen monitor installed. Check with you local fire official, they may provide guidance for cryogens and what volume you would need O2 sensors.

 

Implementing a good standard operating procedure may be your best practice.

Best,

James

 

 

From: ACS Division of Chemical Health and Safety <DCHAS-L**At_Symbol_Here**PRINCETON.EDU> On Behalf Of Murphy, Dr. Ruth Ann
Sent: Wednesday, August 5, 2026 5:19 PM
To: DCHAS-L**At_Symbol_Here**PRINCETON.EDU
Subject: [DCHAS-L] Gas Sensor

 

* External Sender - Proceed Cautiously with Links and Attachments. *

Good Afternoon,

 

Are gas sensors required in chemistry labs with natural gas utilities and/or liquid nitrogen use?  If so, what type of sensor is needed?  Thank you!

 

Best,

 

Ruth Ann Cook Murphy, PhD

Professor of Chemistry

University of Mary Hardin-Baylor

900 College Street

Belton, TX 76513

(254) 295-4542

 

--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org

--- For more information about the DCHAS-L e-mail list, contact the Divisional membership chair at membership**At_Symbol_Here**dchas.org